Saturday 21 April, 2018 |

Top Quality China Ford IDS VCM 2 Clone Wifi Ford VCM II diagnostic Scan Tool Buying Guide

by Administrator | post a comment

Top Quality  China Ford IDS VCM 2 Clone Wifi Ford VCM II diagnostic Scan Tool Buying Guide

Want a Cost And Effective China Super quality ford vcm 2 scan tool. Worried About the cheaper Ford vcm ii scanner with bad quality? Here Gsunlight.com  sharing Quality A China Ford IDS VCM 2 Clone Wifi Ford VCM II diagnostic Scan Tool Buying Guide.

Quality A Ford VCM II China Wifi Ford VCM 2 Clone With V98 Ford IDS Software download



Reasons 1: Multi functions same as original ford ids vcm ii diagnostic tool:

1.Automatic vehicle recognition
2.Read & Clear Diagnostic Trouble Codes (DTCs)
3.Live Data-stream with Recording & Playback Functions for Main ECUs
4.Guided Fault Finding
5.New Software Re-flash for Existing ECUs
6.Programming & Installation of new ECUs (PCM, ABS, Instrument
   Cluster, Air Bag, Fuel Pumps, etc.)
7.Program New Keys
8.Injector Coding
9.Set, Adjust or Remove Speed Governors
10.DPF Regeneration
11.Brake Bleeding
12.Steering Angle Resets
13.All Other Dealer Functions

Reasons 2: Gsunlight.com Quality A China Ford IDS VCM 2 Clone Features:

1. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
2. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.                                                        
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.                                                       
4. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
5. The VCM II supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).                                          
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.                                        
7. The CFR replaces the Vehicle Data Recorder (VDR).                                     

8. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing

Gsunlight.com Quality A China Ford IDS VCM 2 Clone Wifi Ford VCM II diagnostic Tool V98 Ford IDS download Software VM installation Guide:

Downloaded & extracted.
Opened in VMWARE 10. (In one of the first couple of lines in config file change the "12" to "10")
Clicked "I MOVED IT"
Turned of internet (don't know if it matters).
Turned off nonpersistent.
Started Up IDS 105.1 VMWARE
Plugged in OEM VCM and installed drivers.
Made cosmetic changes, performance changes to WIN7.
Opened IDS and made settings changes
Ran Shut down command in Guest System.
Turned nonpersistent back on.

For More details information, welcome to Add my Whatsapp (+86 13691674080) or Skype gsunlight@outlook.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.Gsunlight.com--China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.gsunlight.com
Skype: gsunlight@outlook.com
Email: gsunlight@outlook.com
What;s app: +86 13691674080

Other news for Saturday 21 April, 2018

• MB SD Connect C4 Multiplexer MB Star C4 SD Connect MUX Configuration Failure 00 error Solution

View all news for Saturday 21 April, 2018 on one page

News for Friday 20 April, 2018

• Audi A6L Q7 A8 MMI Control Panel Circuit Board W/Navigation Audi A6L Q7 A8 mmi control panel For audi mmi button replacement
• Stainless Steel BDM Frame Table HQ BDM Frame With Plexiglass for BDM Programmer/CMD100/KESS V2/Ktag/ Fgtech
• Ross Tech VCDS Cable VAG COM VCDS 18.2.1 Crack Cable VCDS 18.2.1 Software Error "Slow Loading!" Solution
• Android /IOS Launch Easydiag 3.0 Software Download Original Easydiag 3.0 Software Update Guide

View all news for Friday 20 April, 2018 on one page

Recent News

• Wednesday 18 April, 2018
• Saturday 14 April, 2018
• Tuesday 10 April, 2018
• Tuesday 03 April, 2018
• Saturday 31 March, 2018

News archive