Wednesday 09 May, 2018 |

Xprog M V5.84 XPROG-M Box 5.8.4 ECU Programmer With XPROG 5.8.4 Software and USB Dongle Features No need activation

by Administrator | post a comment

Xprog 5.84 Auto ECU Programmer with XPROG 5.8.4 Software And USB Dongle Features No need activation

Xprog 5.84 Auto ECU Programmer with USB Dongle and new add some authorization. V5.84 Xprog M Box Add new authorization: AUTH-0025 Authorized 11/4/2014. Gsunlight.com  Xprog 5.84  Auto ECU Programmer with XPROG 5.8.4 Software And USB Dongle Features No need activation.

Xprog 5.84 Auto ECU Programmer V5.84 Xprog M Box with XPROG 5.8.4 Software And USB Dongle



Gsunlight.com  Xprog 5.84 Auto ECU Programmer Highlights:

1. Latest software version: V5.84，Firmware:V4.4
2. With USB Dongle, No need to activate
3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
4.  Language: English
 
XPROG M V5.84 software from Gsunlight.com  windows system required as below:

1. Windows system should be windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well...
2. The windows system should be with at lest 2 partitions (except the CD ROM.)
3. Can not be working with virtual harddisk.

XPROG-M V5.84 Install manuals in words:

1. Click the file "installation.reg", get the file information to the regedit.
2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.
3. Plug the Xprog main interface to the computer, install the USB driver.
4. Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.

XPROG-M V5.84 using tips:

1. You are not allowed to use this newest dongle to update the older version Xprog to V5.84
2. Close all of the computer anti-virus software. If not, X-prog software may be killed.
3. Disconnect the internet. If not, the internet maybe damage the hardware.
4. Uninstall all of the old version xprog-m or xprog box software before you install V5.84 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty...
5. Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty.

For More details information, welcome to Add my Whatsapp (+86 13691674080) or Skype gsunlight@outlook.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.Gsunlight.com --China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.gsunlight.com
Skype: gsunlight@outlook.com
Email: gsunlight@outlook.com
What;s app: +86 13691674080

News for Monday 07 May, 2018

• ODIS 4.3.3 Download 5 in 1 VAG ODIS 4.3.3 Software With ODIS Engineering 8.1.3 promotion 89.99$

View all news for Monday 07 May, 2018 on one page

Recent News

• Thursday 26 April, 2018
• Tuesday 24 April, 2018
• Monday 23 April, 2018
• Sunday 22 April, 2018
• Saturday 21 April, 2018

News archive