Mercedes Benz Ecom Box Replace Mercedes Xentry Diagnosis VCI Work With Xentry, Vediamo & DTS Monaco. Mercedes Benz ECOM DoIP Diagnostic and Programming Tool With 256G SSD Ecom software for Latest Mercedes Till 2019. Mercedes Benz ECOM Box with USB Dongle ecom doip software Support Vediamo and DTS Engineering.

Mercedes Benz Ecom Box Benz ECOM DoIP Diagnostic Programming Tool With 256G SSD Ecom software for Latest Mercedes Till 2019

Mercedes Benz ECOM Box with USB Dongle ecom doip software Support Vediamo and DTS Engineering

eCOM DoIP For Mercedes eCOM ACTIA DoIP Diagnostics & Programming,ACTIA eCOM DoIP Multiplexer Replace Xentry Diagnosis VCI Work With Xentry, Vediamo & DTS Monaco Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5

ACTIA eCOM DoIP Multiplexer replaced Xentry Diagnosis VCI Works With Xentry, Vediamo & DTS Monaco. DON'T need configuration. Directly connect with vehicle after software activation.  Software activation is done via Teamviewer.

Actia eCOM DoIP Box Multiplexer Kit Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5

Top 5 Reasons to Get BENZ ECOM Box:

1. Support DOIP, work on latest Mercedes to year 2019
2. Support Vediamo and DTS Engineering
3. with 256GB SSD Software in package with free activation
4. Support DAS & XENTRY
5. Warranty: Two Years

Note: obd2serve.com also sell Mercedes Benz eCOM + MB Star SD Connect C4 Multiplexer Mercedes, welcom order:

Mercedes Benz eCOM DoIP with 256G SSD + MB Star SD Connect C4 Multiplexer Mercedes with V2019.3 Xentry Das Software HDD




BENZ ECOM Box is the diagnostic and swipe communication interface used by daimler-benz's production and r&d department. It supports the after sales diagnostic software Xentry, Vediamo, and the Monaco DTS, the exclusive development software, with higher access rights than SDconnect (C4).

Mercedes Benz ECOM DoIP supports the CAN/DoIP network, which CAN be used for the diagnosis and brushing of new car audio and video entertainment systems.Vediamo for Mercedes engineers is an engineering software used by Mercedes engineers to develop diagnostic software, that is, Xentry and DAS now in use is developed based on Vediamo and delivered to general after-sales dealers. For this reason, using the Mercedes super engineering version is open to all diagnosis /coding/retrofit/flashing programming features. It is possible to add or reduce SA codes freely without going through VEDOC(the process of the original factory applying for modifying the equipment code), so as to achieve the purpose of modifying the vehicle equipment, such as adding SA500 electric rearview mirror.

Xentry and DAS Developer mode, commonly known as: exploit data engineering version after 2010, has added many restrictions on functions. Therefore, people may encounter that the vehicle version is too new to enter the control unit, or they cannot make any special modifications after entering the control unit. For example, the w204/212 2012 meter may need to be configured in the regional language, or turn on other convenience functions.

The database of diagnosis /coding/retrofit/flashing for the Mercedes engineer version USES the Xentry database, so the Mercedes engineer version is dependent on the Xentry version. As long as the database is new, the Mercedes engineer version can use the V4.00 version on the new model, and compact3 & SDconnect does not support the ODX document. The latest V5.00 supports ODX files with eCom. It is recommended to use eCom with DoIP function, which is faster and more stable.

Mercedes Benz eCOM DoiP Multiplexer Features:

Supports DoIP protocol
ECOM Box Hardware Serial number starts with 2xxxxx
Works with Xentry, DAS software and Engineering programs Vediamo and DTS Monaco
eCOM DoiP supported lines: CAN1, CAN2, K-Line, LIN, Ethernet DoIP

Mercedes Benz ECOM DoIP Car Applications:

Newest vehicles Only (after 2009 - w204 and up) Serial 200xxx
Special for DoIP programming on the latest E and S series.

Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5 flashing/programming

Actia I+ME eCOM DoiP Technical Data:

ECOM DoIP PC Interface: Ethernet / USB (with special cable)
Microprocessor: 32Bit MPC5200 @396MHz
Memory: 64MB RAM, 40 MB Flash
Voltage supply: 12/24 VDC
Operating Temperature: 0..45°C
Storage temperature: -20°C..70°C
Vehicle interface: galvanically decoupled

CAN1 (high speed)

CAN2 (high/low speed)

K-Line

LIN

Ethernet DoIP

KL15
 
Bensz Ecom DoIP Set includes:

ECOM Box Hardware IME4103203

USB-to-LAN Adapter IME4103204

DSUB9 Adapter cable for standard CAN connection MI03300307

ECOM OBD2 cable (IME4103704)

Mercedes Benz eCOM DoIP Software Display: