Autel MaxiSYS Pro MS908P Diagnosic and ECU Programming System compatiable for diagnosis and online programming With original software. Wireless/Wifi Maxisys MS908P Pro Android Diagnostic Scanner With J2534 MaxiFlash Elite Support Update Online. Original Autel MaxiSYS Pro MS908P Vehicle Diagnostic System With Autel MaxiFlash Elite J2534 Reprogramming Tool Support Key Coding.

Autel MaxiSYS Pro MS908P Diagnosic and ECU Programming System Wireless/Wifi Maxisys MS908P Pro Android Diagnostic Scanner With J2534 MaxiFlash Elite Support Update Online

Original Autel MaxiSYS Pro MS908P Vehicle Diagnostic System With Autel MaxiFlash Elite J2534 Reprogramming Tool Support Key Coding

Autel MaxiSYS Pro MS908P Diagnosic and ECU Programming System Highlights:

1. Languages: English, Spanish(for other language except Italian, you need to pay 120USD to change language)

2. 100% Original

3. Autel Maxisys update cost: Update online two years for free,  the upate cost is 1295USD/Year. You still can use as usual if you don't want to update.

4. Big touch screen, no need computer connect.

5. Software version: Every car model software has a different version.

6. Autel Maxisys Pro can do online programming,at the same time it's compatiable for diagnosis and online programming for part of the original software.

7. No country or IP limited. Best and unique ECU program tool

8. Support Proton and Perodua

9. WiFi Technology: The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth

Tips on using Autel MS908P:

1. Autel MaxiSYS Pro MS908P Support CAR LIST
2. when you use Autel MS908P do BMW F series VIN programming, you need buy Ethernet serial cable(22.99USD, free shipping via standard post) and BMW Ethernet Cable(39.99USD,free shipping via standard post)
3. It usually take about 4-5 days for us to prepare it for you, if you need it very urgently, please take it into consideration
4. No Holden Model

Autel Maxisys 908P Description:

MaxiSYS Pro includes reprogramming box and special MaxiSYS® Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks. The MaxiSYS® Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

Wireless/Wifi Maxisys MS908P Pro Android Diagnostic Scanner Features & Functions:

-Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
-Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
-Extraordinarily powerful Cortex-A9 quad-core processor
-9.7 inch 1,024x768 LED-backlit glossy widescreen Multi Touch display with IPS technology
-Built-in 5-megapixel rear camera with autofocus; Virtual on-screen keyboard· Wi Fi wireless to access your favorite web ---resources & automatically update new software
-Unique shop tough ergonomic design features strong rubber protection and housing
-Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
-USB, audio, and auxiliary ports make it easy to connect accessories
-Internal Reliable and fast 32GB Solid State Drive for better performance
-The VCI connects wirelessly to the main unit with ultra-range Bluetooth

Autel MS908P Software advantage:

-Open source Android Operating System for fast boot-up and multitasking
-Easy and intuitive navigation makes finding what you need simple and fast
-Displays live data in text, graph and analog for easy data review and analysis
-Configure live data display options, set alarms, record, and playback data frames with one touch
-Records and playbacks live data to pinpoint troubles of sensors and components
-Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
-Remote technical support for convenient demonstration, training and increased customer satisfaction
-Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles
-Prints out recorded data anytime and anywhere with Wi-Fi technology
 
Autel MaxiSys Pro 908P Support List:

AUDI, BENZ, BMW, DACIA, EU FORD, AU Ford, Ford, Holden, LANDROVER, MINI, OPEL, PEUGEOT, RENAULT, SEAT, SKODA, VW, VOLVO, SMART, JAGUAR, BENZ SPRINTER, SAAB, FIAT, ABARTH, LACIA, ALFA ROMEO, VAUXHALL, MAYBACH, BENTLEY, BUGATTI, PORSCHE,GM, CHRYSLER, FORD,SUZUKI, KIA, DAWEOO, ISUZU, TOYOTA, SUBARU, SCION, NISSAN, MITSUBISHI, LEXUS, INFINITI, HYUNDAI, HONDA, ACCURA, MAZDA.

	Autel MaxiSys MS908 Unrivalled Speed MaxiSys is the fastest scanner ever in the market. It features an extraordinarily fast A9 quad-core processor, a 32G solid state hard drive and a highly sensitive 9.7’’LED capacitive touch screen. The revolutionary open source Android Opearting System allows you perform multiple tasks easily and intuitively. The system boots up in only 20 seconds, which is 5 times faster than competion products, and the diagnostic time for some vehicles is greatly reduced, allowing you to perform your job much quicker.
	Maxisys Pro MS908p Smart Technology Featuring the latest AutoVIN technology to identify CAN vehicles in one touch, and combined with the exclusive AutoScan function, the MaxiSys is the most intelligent system in the industry. These functions allow the technicians to easily detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on selected systems. Another advanced feature, the industry first colud-based online community, puts you in touch with the latest tips and expertise from technicians around the world.
	Maxisys Pro MS908p Ultrafast Wireless The MaxiSys features advanced dual-band(2.4GHz and 5GHz)802.11n Wi-Fi that’s up to twice as fast as any previous-generation diagnostic systems. The MaxiSys Vehicle Communication Interface(VCI) connects via dependable Long-Range Class 1 Buletooth to the host tablet. Once the wireless VCI is connected to the car, the technician is completely free to move around anywhere in the shop. Its wireless connectivity also means you can field updates to the latest software releases, allowing for update anywhere and anytime.
	Maxisys Pro MS908p Exceptional OE-Level Coverage As the fastest growing diagnostic company in the world,Autel has been committed to providing the best and easiest-to-use diagnostic solution with the most extensive coverage of all systems for all the major vehicle manufacturers. This enables independent garages to confidently provide comprehensive servicing in their own workshops without relying on dealer availability. Continual software enhancement will provide additional vehicle coverage.
	ECU Coding  and Programming The Coding function is used to configure the vehicle control modules(ECUs) with extra parameters, while Programming is used to reflash the vehicle ECUs. These functions allow you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. MaxiSys is one of the very few diagnostic systems in the world with the capability of preforming safe and reliable coding and flash programming with affordable costs.
	J2534 Reprogramming Capability The VCI for MaxiSys PRO is a SAE J2534-1 &-2 Compliant Programming Interface. Using the updated OEM software, It is capable of replacing the existing software/firmware in electronic control units(ECUs), programming new ECUs and fixing software-controlled driveability issues and emission issues. Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards Performs the standard Passthru J2534 functionality Fast performance ensures quick reprogramming of even the newest controllers *Requirements: Both a pc and OEM Data subscription are required. Neither is included in this kit.
	Instant Software Updates To keep up with the continuing development of vehicle manufacturers, continuous software improvement is essential for any diagnostic system. MaxiSys was designed with this in mind. Whenever any unknown new vehicle model or a diagnostic error is reported, usually within 48 hours, custom software updates will be made available for the user to download.
	Remote Technical Support The remote technical support function enables Autel technical support personel to access the tool from a remote location. The method significantly reduces the call time, leading to faster problem resolution and increased customer satisfaction.

Autel Maxosys Pro 9089 ECU Programming Function:

AUTEL MAXISYS Pro itself has already supported ECU programming function for BENZ and BMW cars, if you need to get support for more car models,
you must use J2534 device along with OEM software to implement this function. J2534 DEVICE can not only use with AUTEL MAXISYS Pro , but also can work on other OEM software.



Using additional OEM software, the MaxiFlash Pro can be used as a Pass-Thru diagnostics tool as well, which allows users to read and clear Diagnostic Trouble Codes (DTCs) and data log PIDS, collect sensor data and log generic OBDII data etc.

Autel MS908P Function Descriptions DTC & FFD

When this function is selected, the screen displays a list of Stored Codes and Pending Codes. When the Freeze Frame data of certain DTCs are available
for viewing, a snowflake button will display on the right side of the DTC item.The Erase Codes function can be applied by tapping the functional button at
the lower bottom of the screen.



Stored Codes
Stored codes are the current emission related DTCs from the ECM of the vehicle. OBDII/EOBD Codes have a priority according to their emission severity,  with
 higher  priority  codes  overwriting  lower  priority  codes.  The priority of the code determines the illumination of the MIL and the codeserase
procedure. Manufacturers rank codesdifferently, so expect to seedifferences between makes.

Pending Codes
These are codes whose setting conditions were met during the last drive cycle, but need to be met on two or more consecutive drive cycles before
the  DTC  actually  sets.  The  intended  use  of  this  service  is  to  assist  the service  technician  after  a  vehicle  repair  and  after  clearing
diagnostic information, by reporting test results after a single driving cycle.
a)If a test failed during the driving cycle, the DTC associated with that test is reported.If the pending fault does not occur again within 40 to
80 warm-up cycles, the fault is automatically cleared from memory.
b)Test  results  reported  by  this  service  do  not  necessarily  indicate  afaulty  component  or  system.  If  test  results  indicate  another  failure
after  additional  driving,  then  a  DTC  is  set  to  indicate  a  faulty component or system, and the MIL is illuminated.

Freeze Frame
In  most  cases  the  stored  frame  is  the  last  DTC  thatoccurred.Certain DTCs,  those  that  have  a  greater  impact  on  vehicle  emission,  have  a
higher  priority.  In  these  cases,  the  highest  priority  DTC  is  the  one  for which the freeze frame records are retained. Freeze frame data includes
a “snapshot”of critical parameter values at the time the DTC is set.

Erase Codes
This option is used to clear all emission related diagnostic data such as,DTCs,freeze frame data and manufacturer specific enhanced data from
the  vehicle’s  ECM,  and  resets  the  I/M  Readiness  Monitor  Status  for  allvehicle monitors to Not Ready or Not Complete status.A confirmation
screen displays when the clear codes option is selected toprevent accidental loss of data. Select Yes on the confirmation screen to continue, or
No to exit.

I/M Readiness
This function is used to check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for
compliance to a  state  emissions  program.  Selecting  I/M  Readiness  opens  a  submenu  with two choices:
Since DTCs Cleared–displays the status of monitors since the last timethe DTCs are erased.
This Driving Cycle–displays the status of monitors since the beginningof the current drive cycle.

Live Data
This  function  displays  the  real  time  PID  data  from  ECU.  Displayed  data includes  analog  inputs  and  outputs,  digital  inputs  and  outputs,
and  systemstatus information broadcast on the vehicle data stream.

O2 Sensor Monitor
This option allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
The  O2  Sensor  Monitor  test  function  is  not  supported  by  vehicles  whichcommunicate using a controller area network (CAN). For O2 Sensor Monitor
tests results of CAN-equipped vehicles, refer to On-Board Monitor

On-Board Monitor
This option allows you to view the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.

Component Test
This  service  enables  bi-directional control  of  the  ECM  so  that  the  diagnostictool is able to transmit control commands to operate the
vehicle systems. Thisfunction is useful in determining how well the ECM responds to a command.

Vehicle Information
The  option displays the vehicleidentification  number  (VIN),  the  calibrationidentification,   and   the   calibration   verification   number   (CVN),   and 
other information of the test vehicle.

Vehicle Status
This  item  is  used  to  check  the  current  condition of  the  vehicle,  including communication protocols of OBD II modules, retrieved codes
amount, status of the Malfunction Indicator Light (MIL), and other additional information may be displayed.

Service
The Service section is specially designed to provide you quick access to the vehicle systems for various scheduled service and maintenance performances.
The typical  service operation  screen is  a  series  of  menu  driven  executive commands.By  following  the  on-screen  instructions  to  select appropriate
execution  options,  enter  correct  valuesor  data,  and  perform  necessary actions, the  system  will  guide you through  the  complete  performance  for
various service operations.

The most commonly performed service functions include:
Oil Reset Service
TPMS Programming Service
EPB Service
ABS/SRS Services
SAS Calibration Service
DPF Regeneration Service

This section describes the main functions for vehicle service:
Oil Reset Service
This function allows you to perform reset for the Engine Oil Life system, which calculates  an  optimal  oil  life  change interval  depend  on  the
vehicle  driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when
the next oil change is required.

Tire Pressure Monitor System (TPMS) Service
This  function  allows  you  to  quickly  look  up  the  tire  sensor  IDs  from  the vehicle's ECU,as well as to perform TPMS
programming and reset proceduresafter tire sensors are replaced.

Electric Parking Brake (EPB) Service
This function  has  a  multitude  of  usages to  maintain  the electronic braking system  safely  and  effectively.The applications include
deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, ands etting brakes
after disc or pad replacement, etc.

ABS/SRS Services
This function allows you to perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System
and the Supplemental Restraint System, such as Automated Bleeding,Pump Motor Test,and checking Module information, etc.

Steering Angle Sensor (SAS) Service
This  service  function  allow  you  to  perform  calibration  for  the  Steering  Angle Sensor,  which  permanently stores the current
steering  wheel  position  as  the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration,
the steering angle sensor  fault  memory  is automatically cleared.

DPF Regeneration Service
The  Diesel Particulate  Filter service function  performs the regeneration procedure which is the DPF cleaning operation to clear
the blockage through continuous burning of the particulate matter captured in the DPF filter.If the DPF light on the vehicle comes
on  and  you successfully complete  a  DPF regeneration cycle, you will notice that the DPF light will automatically turn off.

Maxisys Pro MS908p Specification:

Autel MaxiSys Pro MS908P Package List:

1. Main part
Quick reference guide
Lighter Fuse
Main cable
Protective carrying case
USB Cable
User’s Manual
Cigarette Lighter
Compact Disc (CD)
AC/DC External Power Adapter
Clipper Cable
Capacitive Stylus Pen
Soft Cloth
Packing List
Mini USB Cable
Ethernet Serial Cable
MaxiFlash Elite
 
2. Adaptor
GM/Daewoo-12 adaptor
PSA-2 adaptor
Fiat-3 adaptor
Audi-2+2 adaptor
BMW-20 adaptor
Benz-38 adaptor
Kia-20 adaptor
Mitsubishi/Hyundai-12+16 adaptor
Nissan-14 adaptor
Honda-3 adaptor
Chrysler-16 adaptor
Benz-14 adaptor (Optional)
 



How To Do Autel MaxiSYS Pro MS908P Update Guide:

Step 1:Register the tool
Please go to our website www.autel.com to register an Autel ID.
Then sign in our website with your Autel ID and password to register your tool: http://pro.auteltech.com/
Note: when registering the tool on our website, please make sure that the serial number and register
password that you input are correct. On the tool itself, you can press on Setup->About to double check
the serial number and register password. If you only have the S/N, please contact our technical support
to check out the register password.
Step 2:Update via Computer:
1. Log in our website with your Autel ID and password, and then download the latest PC Suite for your tool from your account.
2. Then please install the PC Suite on a Windows computer that can get Internet access.
3. Insert the SD card to USB port of the computer via a SD card reader, run the PC Suit, then input your Autel ID and password
to log in our system. If you forget your password unintentionally, you may always click the [Forget Password?] to link to our
website and reset your password.
4. Then wait for the Update window to display. You can use the pull-down menu on the right corner to select the correct SD card
if two or more SD cards have been connected to the PC. And you can click on the Install button to download the software updates.
5.To ensure the good performance of the scan tool, it is recommended to download and install all the software updates.
6. After downloading all the software, please insert the SD card back to the tool; then you can enjoy the new software.

Comparison between Autel MaxiSYS Pro MS908P and other Autel Diagnose Systems